China Snap-In Vent Plug D17 E10HO - Quality Product from Trusted Suppliers and Factory
Product Attributes
| PRODUCT NAME: | Snap-In Vent Plug |
| PRODUCT MODEL: | ZZPIP-Vent Plug_D17_E10HO |
| PRODUCT DIAGRAM: |
|
| MEMBRANE MODEL: | ZZPIP-E10HO |
| APPLICATION FIELD: | Chemicals Packaging |
| APPLICATION CHEMICAL: | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Live bacterial agent, Thick liquid fertilizer |
Product Properties
| Physical Properties | Referred Test Standard | Unit | Typical Data |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Minimum Air Flow Rate | ASTM D737 | ml/min @ 7KPa | ≥320 |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 400 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥150 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m²/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the ZZPIP Snap-In Vent Plug?
The vent plug equalizes pressure differentials in chemical containers caused by temperature shifts, altitude changes, and gas release or consumption. This successfully prevents container deformation and liquid leakage.
What materials are used in the construction of the ZZPIP-Vent Plug_D17_E10HO?
The plug body is made of High-Density Polyethylene (HDPE), and the integrated breathable membrane features a PTFE/PO non-woven construction with oleophobic and hydrophobic surface properties.
What are the airflow and water entry pressure specifications?
It features a minimum air flow rate of ≥320 ml/min (with a typical rate of 400 ml/min) at 7KPa, and a water entry pressure resistance of ≥150 KPa sustained for 30 seconds.
Which chemical applications is this vent plug suitable for?
It is ideal for packaging containers storing high-concentration hazardous chemicals, low-concentration household chemicals, agricultural chemicals, bleachers, disinfectants, amino acids, live bacterial agents, and thick liquid fertilizers.
What are the environmental compliance standards of this product?
The vent plug meets all RoHS requirements according to the IEC 62321 standard and is tested to be completely PFOA and PFOS free.
How should the vent plugs be stored to ensure their shelf life?
The product has a shelf life of two years from the date of receipt, provided it is stored in its original packaging in a controlled environment below 80°F (27°C) and under 60% relative humidity (RH).