Non-PFAS Vent Membrane
Membrane Properties:
|
PHYSICAL PROPERTIES |
REFERED TEST STANDARD |
UNIT |
TYPICAL DATA |
|
Membrane Color |
/ |
/ |
White |
|
Membrane Construction |
/ |
/ |
PO/PO nonwoven |
|
Membrane Surface Property |
/ |
/ |
Hydrophobic |
|
Thickness |
ISO 534 |
mm |
0.16±0.05 |
|
Interlayer Bonding Strength (90 degree peel) (90 ) |
Internal Method |
N/inch |
>2 |
|
Min Air Flow Rate |
ASTM D737 ( 1 cm²) |
ml/min/cm²@ 7Kpa |
>300 |
|
Typical Air Flow Rate |
ASTM D737 ( 1 cm²) |
ml/min/cm²@ 7Kpa |
500 |
|
Temporary Water Entry Pressure |
ASTM D751 ( 1 cm²) |
KPa |
>250 |
|
Water Entry Pressure (Dwell 30s) 30 |
ASTM D751 ( 1 cm²) |
KPa for 30 sec |
>200 |
|
IP Rating |
IEC 60529 |
/ |
IP68 |
|
Water Vapor Transmission Rate |
GB/T 12704.2 38℃/50%RH |
g/m2/24h |
>5000 |
|
Oleophobic Grade |
AATCC 118 |
Grade |
NA |
|
Operation Temperature |
IEC 60068-2-14 |
℃ |
-40℃ ~ 120℃ |
|
ROHS |
IEC 62321 |
/ |
Meet ROHS Requirements ( ROHS ) |
|
REACH SVHC |
REACH 1907/2006/EC |
/ |
Meet REACH Requirements ( REACH ) |
Shelf Life：
Note：
ZZPIP givesthis information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check thesuitability and usability in the specific application, since the performance of the product can only be judged when allnecessary operating data are available.