Inquiry
Form loading...
Snap-In Vent Plug D15 E10ZO - High-Quality Product from China Suppliers & Reliable Factory
Hot Products

Snap-In Vent Plug D15 E10ZO - High-Quality Product from China Suppliers & Reliable Factory

,

PRODUCT NAME: Snap-In Vent Plug

,

PRODUCT MODEL: Vent Plug_D15_E10ZO

,

Important Note:

,

The data provided above reflects typical characteristics of the membrane raw material and is intended for reference only. It should not be used as definitive data for outgoing quality control.

,

All technical information and guidance presented here is based on Zzpip's extensive experience and test results. While Zzpip strives to provide accurate and reliable information to the best of its knowledge, it assumes no legal responsibility. We encourage customers to verify the suitability and usability of our products for their specific applications, as the performance can only be accurately assessed with all necessary operating data at hand.

,

As a leading manufacturer from China, Zzpip is committed to delivering high-quality vent plugs. Our factory employs strict quality control measures to ensure that our products meet the highest standards demanded by our clients. We take pride in being a trusted supplier for innovative solutions in the industry.

,

    Product Attributes

    PRODUCT NAME
    Snap-In Vent Plug
    PRODUCT MODEL
    Vent Plug_D15_E10ZO
    MEMBRANE MODEL
    E10ZO
    APPLICATION FIELD
    Chemicals Packaging
    APPLICATION CHEMICAL
    Bleacher, Disinfectant, Amino Acid, Agrochemicals, Live bacterial agent, Thick liquid fertilizer
    Vent Plug D15 E10ZO Product Diagram

    Product Properties

    PHYSICAL PROPERTIES REFERED TEST STANDARD UNIT TYPICAL DATA
    Plug Material / / HDPE
    Plug Color / / White
    Membrane Construction / / PTFE/PO non-woven
    Membrane Surface Property / / Oleophobic & Hydrophobic
    Typical Air Flow Rate ASTM D737 ml/min @ 7KPa 700
    Water Entry Pressure ASTM D751 KPa dwell 30 sec ≥80
    IP Grade IEC 60529 / IP67/IP68
    Moisture Vapor Transmission ASTM E96 g/m²/24h >5000
    Oleophobic Grade AATCC 118 Grade ≥7
    Service Temperature IEC 60068-2-14 -40℃ ~ 125℃
    ROHS IEC 62321 / Meet ROHS Requirements
    PFOA & PFOS US EPA 3550C & US EPA 8321B / PFOA & PFOS Free

    Application

    This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.

    The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.

    Shelf Life

    Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

    Note

    All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.

    All technical information and advice given here is based on ZZPIP’s previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

    Frequently Asked Questions (FAQ)

    Q What is the primary function of the Snap-In Vent Plug?
    The Snap-In Vent Plug is designed to equalize pressure differentials in chemical containers caused by temperature changes, altitude variations, and the release or consumption of gases, effectively preventing container deformation and liquid leakage.
    Q Which chemical packaging applications is this product suitable for?
    It is highly suitable for breathable cap products used in containers holding High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals, Bleachers, Disinfectants, Amino Acids, Live bacterial agents, and Thick liquid fertilizers.
    Q What are the materials and properties of the venting membrane?
    The membrane is constructed from PTFE/PO non-woven material, featuring both oleophobic and hydrophobic surface properties. It offers a typical air flow rate of 700 ml/min @ 7KPa and a water entry pressure of ≥80 KPa.
    Q What is the storage shelf life of the Vent Plug_D15_E10ZO?
    The product has a shelf life of two years from the date of receipt, provided it is kept in its original packaging in a controlled environment below 80° F (27° C) with a relative humidity (RH) of 60%.
    Q Does this vent plug comply with international environmental standards?
    Yes, the vent plug meets all ROHS requirements (tested under IEC 62321) and is completely PFOA & PFOS free (tested under US EPA 3550C & US EPA 8321B).

    Leave Your Message