Snap-In Vent Plug D15 E30SO from China Suppliers - High-Quality Factory Products for Various Applications
Product Attributes
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | Vent Plug_D15_E30SO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | E30SO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| Physical Properties | Referred Test Standard | Unit | Typical Data |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 1500 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥50 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | °C | -40°C ~ 125°C |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
The Snap-In Vent Plug (Model: Vent Plug_D15_E30SO) is designed to equalize pressure differentials inside chemical packaging containers. These differentials are typically caused by temperature changes, altitude variations, or the release/consumption of gases. Equalizing this pressure prevents container deformation and potential liquid leakage.
Which chemicals is this vent plug compatible with?
It is highly suitable for agricultural chemicals, liquid fertilizers, household chemicals, amino acids, disinfectants, bleachers, and other high-concentration hazardous or special chemicals.
What are the material specifications of the plug and its membrane?
The plug is made of high-quality White HDPE. The integrated membrane utilizes a PTFE/PO non-woven construction, which features both oleophobic (oil-repellent) and hydrophobic (water-repellent) surface properties for maximum security.
What are the temperature and environmental protection ratings?
The vent plug has a broad service temperature range of -40°C to 125°C. It meets IP67/IP68 protection grades, is fully RoHS compliant, and is certified PFOA & PFOS free.
How should the vent plugs be stored, and what is their shelf life?
The product has a shelf life of two years from the date of receipt. To ensure performance, it must be stored in its original, unopened packaging in a controlled environment kept below 80°F (27°C) and under 60% relative humidity (RH).