Snap-In Vent Plug D15 E30SO - High-Quality China Suppliers and Factory Products
Product Attributes
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | Vent Plug_D15_E30SO |
| MEMBRANE MODEL | E30SO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| Physical Properties | Referred Test Standard | Unit | Typical Data |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 1500 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥50 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m²/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note:
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
The Snap-In Vent Plug equalizes pressure differentials in chemical containers caused by temperature shifts, altitude changes, or the release/consumption of gases. This effectively prevents container deformation and liquid leakage.
What types of chemicals are compatible with this vent plug?
It is suitable for packaging a wide range of chemicals, including high-concentration hazardous chemicals, low-concentration household chemicals, agricultural chemicals (such as agrochemicals and liquid fertilizers), bleachers, disinfectants, and amino acids.
What are the material properties of the membrane?
The membrane is constructed from a PTFE/PO non-woven material. It features both oleophobic (oil-repellent) and hydrophobic (water-repellent) surface properties to ensure reliable barrier performance.
What is the IP rating and operating temperature range?
The vent plug conforms to IP67/IP68 ingress protection standards and is designed to operate reliably within a service temperature range of -40°C to 125°C.
How long is the shelf life, and what are the storage requirements?
The product has a shelf life of two years from the date of receipt, provided it is kept in its original packaging and stored in an environment below 80°F (27°C) with a relative humidity (RH) of 60%.
Does this product comply with environmental regulations?
Yes, the Snap-In Vent Plug meets all RoHS requirements and is verified to be completely PFOA and PFOS free.