Hot Products
0102030405
Snap-In Vent Plug D15 E30SO - Quality Product from China Suppliers and Factory
Product Attributes
| Specification | Details |
|---|---|
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | Vent Plug_D15_E30SO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | E30SO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 1500 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥50 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | °C | -40°C ~ 125°C |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
It equalizes pressure differentials inside chemical containers caused by temperature shifts, altitude variations, and gas release or consumption. This prevents container deformation and potential liquid leakage.
Which chemical packaging applications is this product suitable for?
It is designed for breathable cap products used in chemicals packaging. It is highly suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals (like liquid fertilizers), and other special chemicals.
What materials are used in the Vent Plug_D15_E30SO?
The plug body is constructed from HDPE (High-Density Polyethylene), while the breathable membrane is made of a PTFE/PO non-woven material.
What are the storage requirements and shelf life?
The product has a shelf life of two years from the date of receipt, provided it is stored in its original packaging in a controlled environment below 80° F (27° C) and 60% Relative Humidity (RH).
What environmental and chemical resistance ratings does the membrane have?
The membrane features an Oleophobic & Hydrophobic surface property with an Oleophobic Grade of ≥7. It offers an IP Grade of IP67/IP68, is ROHS compliant, and is free of PFOA & PFOS.