Hot Products
0102030405
Snap-In Vent Plug D17 E10HO - High Quality from China Suppliers & Factory for Superior Performance
Product Attributes
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | ZZPIP-Vent Plug_D17_E10HO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | ZZPIP-E10HO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Live bacterial agent, Thick liquid fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Minimum Air Flow Rate | ASTM D737 | ml/min @ 7KPa | ≥320 |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 400 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥150 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | °C | -40°C ~ 125°C |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
The primary function is to equalize pressure differentials in chemical containers caused by temperature variations, altitude changes, and gas release or consumption. This process effectively prevents container deformation and liquid leakage.
Which chemicals are suitable for packaging with these vent plugs?
They are suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals, and other Special Chemicals, including Bleachers, Disinfectants, Amino Acids, Live bacterial agents, and Thick liquid fertilizers.
What materials are used for the plug and the membrane?
The plug is made of High-Density Polyethylene (HDPE) in white, while the membrane is constructed from a PTFE/PO non-woven material featuring oleophobic and hydrophobic surface properties.
What are the temperature limit and IP ratings for this product?
The product has a service temperature range of -40°C to 125°C and meets IP67/IP68 ingress protection standards according to IEC 60529.
What is the shelf life and recommended storage environment?
The shelf life is two years from the date of receipt, provided the product remains in its original packaging and is stored in an environment below 80°F (27°C) with 60% Relative Humidity (RH).
Does the Snap-In Vent Plug comply with RoHS and chemical regulations?
Yes, the product meets RoHS requirements under IEC 62321 standards and is certified as PFOA & PFOS free under US EPA 3550C & US EPA 8321B testing.