Hot Products
0102030405
Snap-In Vent Plug from China Suppliers - High-Quality Factory Model ZZPIP-Vent Plug_D17_E20WO
Product Technical Data Sheet
| PRODUCT NAME | Snap-In Vent Plug |
|---|---|
| PRODUCT MODEL | ZZPIP-Vent Plug_D17_E20WO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | ZZPIP-E20WO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERENCED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 (Test Area: 1cm²) |
ml/min @ 7KPa | 1200 |
| Water Entry Pressure | ASTM D751 (Test Area: 1cm²) |
KPa dwell 30 sec | ≥70 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m²/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
Q
What is the primary function of the Snap-In Vent Plug (ZZPIP-Vent Plug_D17_E20WO)?
The primary function is to equalize pressure differentials in chemical containers caused by temperature variations, altitude changes, and gas release/consumption. This effectively prevents container deformation and liquid leakage.
Q
Which chemicals are compatible with this vent plug?
It is suitable for packaging containers carrying Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer, and other high-concentration hazardous or household chemicals.
Q
What are the key material specifications of the plug and membrane?
The plug body is made of HDPE (High-Density Polyethylene) in white, while the membrane features a PTFE/PO non-woven construction with oleophobic and hydrophobic properties.
Q
What is the IP rating and operational temperature range?
The product achieves an IP67/IP68 rating according to IEC 60529 standards and is designed to operate reliably in temperatures ranging from -40℃ to 125℃.
Q
Is this product compliant with environmental standards?
Yes, the vent plug meets all RoHS requirements (tested under IEC 62321) and is completely PFOA & PFOS free.
Q
How should the vent plugs be stored to maintain their shelf life?
The product has a shelf life of two years from the date of receipt, provided it is stored in its original packaging in an environment below 80° F (27° C) and under 60% relative humidity (RH).