Hot Products
0102030405
Snap-In Vent Plug from China Suppliers - High Quality Factory Product Model ZZPIP-Vent Plug_D17_E20WO
Product Technical Data Sheet
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | ZZPIP-Vent Plug_D17_E20WO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | ZZPIP-E20WO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERRED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 (Test Area: 1cm²) | ml/min @ 7KPa | 1200 |
| Water Entry Pressure | ASTM D751 (Test Area: 1cm²) | KPa dwell 30 sec | ≥70 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m²/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note & Technical Advice
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control. All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
The Snap-In Vent Plug is designed to equalize pressure differentials inside chemical containers caused by temperature variations, altitude changes, and the release or consumption of gases. This action prevents container deformation and potential liquid leakage.
Which chemicals are compatible with this vent plug?
It is highly suitable for chemicals packaging containing Bleacher, Disinfectant, Amino Acid, Agrochemicals (Agricultural Chemicals), Liquid Fertilizer, high-concentration hazardous chemicals, and low-concentration household chemicals.
What materials are used in the construction of the ZZPIP-Vent Plug?
The plug is made of High-Density Polyethylene (HDPE) in white, and the integrated membrane features a PTFE/PO non-woven construction with Oleophobic & Hydrophobic surface properties.
What are the storage requirements and shelf life for this product?
The product has a shelf life of two years from the date of receipt, provided it is stored in its original packaging at temperatures below 80°F (27°C) and relative humidity (RH) below 60%.
What environmental and safety standards does the vent plug meet?
The vent plug complies with RoHS requirements (under test standard IEC 62321) and is verified as PFOA & PFOS free (under test standards US EPA 3550C & US EPA 8321B). It also features an IP67/IP68 ingress protection grade.