Hot Products
0102030405
Snap-In Vent Plug from China Suppliers | Reliable Factory Product for Ventilation Systems
Product Technical Data Sheet
| PRODUCT NAME： | Snap-In Vent Plug |
| PRODUCT MODEL： | ZZPIP-Vent Plug_D17_E20WO |
| PRODUCT DIAGRAM： |
|
| MEMBRANE MODEL： | ZZPIP-E20WO |
| APPLICATION FIELD： | Chemicals Packaging |
| APPLICATION CHEMICAL： | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 （测试面积：1cm²） |
ml/min @ 7KPa | 1200 |
| Water Entry Pressure | ASTM D751 （测试面积：1cm²） |
KPa dwell 30 sec | ≥70 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life：
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
Note：
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions
What is the primary function of the Snap-In Vent Plug?
It equalizes the pressure differentials in chemical containers caused by temperature fluctuations, altitude changes, and gas release or consumption. This successfully prevents container deformation and liquid leakage.
What materials are used in the construction of the ZZPIP-Vent Plug_D17_E20WO?
The plug body is made of HDPE (High-Density Polyethylene), and the breathable membrane is constructed using a PTFE/PO non-woven material.
Which chemicals is this vent plug compatible with?
It is suitable for packaging containers holding Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer, and other high or low-concentration household and hazardous chemicals.
What are the key performance ratings of the membrane?
The membrane features an Oleophobic & Hydrophobic surface with a typical air flow rate of 1200 ml/min @ 7KPa, a water entry pressure of ≥70 KPa, and an IP Grade of IP67/IP68.
What is the shelf life and recommended storage condition?
The product has a shelf life of two years from the date of receipt, provided it is stored in its original packaging at temperatures below 80° F (27° C) and a relative humidity (RH) of 60%.