Hot Products
0102030405
Snap-In Vent Plug_D15_E10HO - High Quality China Suppliers and Factory Direct Product
Product Attributes
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | Vent Plug_D15_E10HO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | E10HO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Photovoltaic liquid, electrolyte, general pesticide fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Minimum Air Flow Rate | ASTM D737 | ml/min @ 7KPa | ≥250 |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 400 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥150 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Frequently Asked Questions
What is the main application of the Snap-In Vent Plug?
The Snap-In Vent Plug (Model: Vent Plug_D15_E10HO) is primarily used in chemicals packaging. It equalizes pressure differentials in containers caused by temperature shifts, altitude changes, and gas release or consumption, thereby preventing container deformation and liquid leakage.
What are the materials used in the plug and membrane?
The plug body is made of High-Density Polyethylene (HDPE), and the membrane features a PTFE/PO non-woven construction, providing both oleophobic and hydrophobic surface properties.
What are the typical airflow and water entry pressure ratings?
The minimum airflow rate is ≥250 ml/min @ 7KPa (with typical airflow at 400 ml/min @ 7KPa). The water entry pressure is ≥150 KPa with a 30-second dwell time, meeting IP67/IP68 standards.
What is the service temperature range of the vent plug?
According to IEC 60068-2-14 standards, the product has a reliable service temperature range of -40℃ to 125℃.
Does the product comply with environmental regulations?
Yes, the Snap-In Vent Plug meets ROHS requirements (tested under IEC 62321) and is certified PFOA & PFOS Free (tested under US EPA 3550C & US EPA 8321B standards).
What are the recommended storage conditions to ensure the 2-year shelf life?
The product should be stored in its original packaging in an environment kept below 80° F (27° C) and at a maximum of 60% relative humidity (RH).