Snap-In Vent Plug_D15_E30SO - Quality Product from China Suppliers | Reliable Vent Plug Factory
Product Attributes
| PRODUCT NAME | Snap-In Vent Plug |
| PRODUCT MODEL | Vent Plug_D15_E30SO |
| PRODUCT DIAGRAM |
|
| MEMBRANE MODEL | E30SO |
| APPLICATION FIELD | Chemicals Packaging |
| APPLICATION CHEMICAL | Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
|---|---|---|---|
| Plug Material | / | / | HDPE |
| Plug Color | / | / | White |
| Membrane Construction | / | / | PTFE/PO non-woven |
| Membrane Surface Property | / | / | Oleophobic & Hydrophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 1500 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥50 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Oleophobic Grade | AATCC 118 | Grade | ≥7 |
| Service Temperature | IEC 60068-2-14 | °C | -40°C ~ 125°C |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on ZZPIP previous experiences and test results. ZZPIP gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Frequently Asked Questions (FAQ)
Q: What is the primary function of the Snap-In Vent Plug?
The primary function of the Snap-In Vent Plug is to equalize pressure differentials in chemical containers caused by temperature changes, altitude fluctuations, and gas release or consumption, thereby preventing container deformation and liquid leakage.
Q: What materials are used in the construction of the Vent Plug_D15_E30SO?
The plug body is constructed from High-Density Polyethylene (HDPE), and the integrated membrane is composed of a PTFE/PO non-woven material.
Q: Which chemicals is this vent plug compatible with?
It is highly suitable for chemicals packaging containing Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer, as well as various high-concentration hazardous and household chemicals.
Q: What are the ingress protection (IP) and temperature ratings?
The vent plug is rated at IP67/IP68 according to IEC 60529 standards, and it operates reliably within a service temperature range of -40°C to 125°C.
Q: Does the product comply with environmental regulations?
Yes, the product is compliant with RoHS requirements (tested under IEC 62321) and is completely PFOA & PFOS free.
Q: What are the recommended storage conditions for a 2-year shelf life?
To maintain its 2-year shelf life, the product must be stored in its original, unopened packaging in an environment kept below 80°F (27°C) with a relative humidity (RH) of 60%.