Snap In Vent Valve TC05SO50 - High-Quality Product from Leading China Suppliers and Factory
Product Description
Outdoor cabinets are continuously exposed to harsh environments such as heavy rain, dust, sand, and strong winds. Under changing environmental conditions, pressure builds up inside the sealed cabinet, putting stress on the seals. Over time, pressure can cause seals to fail, allowing water, corrosive liquids, salts, and particles to enter the cabinet and damage the electronics inside. Protective vents are the leading solution for protecting sensitive electronic equipment. Guard vents allow air to flow freely in and out of the sealed cabinet, balancing pressure and reducing condensation. At the same time, they provide a long-lasting barrier to protect electronic devices from contamination. The result is improved reliability, safety and product life of sealed electronic devices.
Payment and Logistics
Product Diagram
Product Properties
| PHYSICAL PROPERTIES | TEST METHOD | UNIT | TYPICAL DATA |
| Valve Color | / | / | Black |
| Valve Material 1 | / | / | PC |
| Valve Material 2 | / | / | PBT+30% GF |
| Seal ring Color | / | / | Red |
| Seal ring Material | / | / | Silicone Rubber |
| Membrane Construction | / | / | PTFE/PET non-woven |
| Membrane Surface Property | / | / | Hydrophobic & Oleophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min @ 7KPa | 550 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥110 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
| Service Temperature | IEC 60068-2-14 | ℃ | -40℃~150℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Installation Recommendation
Recommended Installation Dimensions
Application
AYN® Snap-In Breathable Valve effectively equalize pressure and reduce condensation in sealed enclosures, while keeping out solid and liquid contaminants. ZZPIP® Snap-In Vent Valve is used to protect Automotive sensitive control units, sensors/actuators, motors and hybrid/electric component.
Shelf Life
Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.