Inquiry
Form loading...
Snap In Vent Valve TC05SO50

Snap Valve

Snap In Vent Valve TC05SO50

  • Product Model AYN-SIVVD12_TC05SO50
  • Membrane Model AYN-TC05SO50
Note

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.。

All technical information and advice given here is based on Aynuo’s previous experiences and test results. Aynuo gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

Product Description

Outdoor cabinets are continuously exposed to harsh environments such as heavy rain, dust, sand, and strong winds. Under changing environmental conditions, pressure builds up inside the sealed cabinet, putting stress on the seals. Over time, pressure can cause seals to fail, allowing water, corrosive liquids, salts, and particles to enter the cabinet and damage the electronics inside. Protective vents are the leading solution for protecting sensitive electronic equipment. Guard vents allow air to flow freely in and out of the sealed cabinet, balancing pressure and reducing condensation. At the same time, they provide a long-lasting barrier to protect electronic devices from contamination. The result is improved reliability, safety and product life of sealed electronic devices.

Payment and Logistics

Packaging details:
1) The outer packaging is packed in PE bags and cartons, 500-1000 pieces of pure PTFE film/bag.
2) Carton size: customized or based on actual weight and volume.
Shipping details:
1) Within 3-7 days after receiving payment via express (3-5 working days).
2) Click here to tell us your shipping requirements.

Product Diagram

Snap In Vent Valve AYN-TC05SO50 (1)4f9

Product Properties

PHYSICAL PROPERTIES TEST METHOD UNIT TYPICAL DATA
Valve Color / / Black
Valve Material 1 / / PC
Valve Material 2 / / PBT+30% GF
Seal ring Color / / Red
Seal ring Material / / Silicone Rubber
Membrane Construction / / PTFE/PET non-woven
Membrane Surface Property / / Hydrophobic & Oleophobic
Typical Air Flow Rate ASTM D737 ml/min @ 7KPa 550
Water Entry Pressure ASTM D751 KPa dwell 30 sec ≥110
IP Grade IEC 60529 / IP67/IP68
Moisture Vapor Transmission ASTM E96 g/m2/24h >5000
Service Temperature IEC 60068-2-14 -40℃~150℃
ROHS IEC 62321 / Meet ROHS Requirements
PFOA & PFOS US EPA 3550C & US EPA 8321B / PFOA & PFOS Free
China Plywood Manufacturer--Film Faced Plywood (5)m9w
China Plywood Manufacturer--Film Faced Plywood (6)tt0
China Plywood Manufacturer--Film Faced Plywood (7)lwn

Installation Recommendation

Recommended Installation Dimensions

Snap In Vent Valve AYN-TC05SO50 (2)x21

Application

AYN® Snap-In Breathable Valve effectively equalize pressure and reduce condensation in sealed enclosures, while keeping out solid and liquid contaminants. AYN® Snap-In Vent Valve is used to protect Automotive sensitive control units, sensors/actuators, motors and hybrid/electric component.

Shelf Life

Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

Leave Your Message